Wheel Speed Sensor Removal and Installation
Front

3. Front Wheel Speed Sensor - Remove

1.
Remove the grommet (A) from the body.


2.
Disconnect the connector (B).

3.
Remove the wire guide rubbers (C), clip (D), and bolt (E).

4.
Remove the wheel speed sensor (F).

4. All Removed Parts - Install

1.
Install the wheel speed sensor in the reverse order of removal, and note these items:

Install the sensor carefully to avoid twisting the wires.
If the wheel speed sensor comes in contact with the wheel bearing, it is faulty.
Make sure there is no debris in the sensor mounting hole.

Rear

4. Rear Wheel Speed Sensor - Remove

1.
Disconnect the connector (A).


2.
Remove the wire guide rubber (B) and clip (C).

3.
Remove the bolt (D).

4.
Remove the wheel speed sensor (E).

5. All Removed Parts - Install

1.
Install the wheel speed sensor in the reverse order of removal, and note these items:

Install the sensor carefully to avoid twisting the wires.
If the wheel speed sensor comes in contact with the hub bearing unit, it is faulty.
Make sure there is no debris in the sensor mounting hole.