12 Volt Battery Terminal Fuse Box Removal and Installation
1.
12 Volt Battery Terminal - Disconnect
1.
Disconnect and isolate the negative cable and 12 volt battery sensor from the 12 volt battery
.
NOTE:
Always disconnect the negative cable from the 12 volt battery first.
Do not hold the 12 volt battery sensor connector, for protecting from damage when removing the negative terminal.
2.
12 Volt Battery Terminal Fuse Box - Remove
1.
Remove the cover (A).
2.
Disconnect the each cable terminals (B) from the 12 volt battery terminal fuse box (C).
3.
Remove the 12 volt battery terminal fuse box from the 12 volt battery terminal.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
