EVAP Canister Removal and Installation
1.
Front Floor Undercover - Remove
2.
EVAP Canister Assembly - Remove
1.
Disconnect the fuel line quick-connect fitting
(A).
2.
Press the tab (B) and disconnect the fuel vent hose (C).
3.
Disconnect the hoses (A).
4.
Disconnect the connectors (B).
5.
Remove the EVAP canister assembly (C).
3.
EVAP Canister - Remove
1.
Remove the FTP sensor (A)
.
2.
Remove the EVAP canister (B).
3.
Remove the FTP sensor subharness (C), the EVAP canister vent shut valve case (D) and the EVAP canister filter (E) if needed.
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: When install the hoses, align the marks (A) on hoses and each part.
