CVT Differential Carrier Bearing Outer Race Replacement
Special Tools Required
Image Description/Tool Number
310162.png Bearing Driver Attachment, 62 x 68 mm 07746-0010500
310169.png Driver Handle, 15 x 135L 07749-0010000
1149717.png Bearing Driver Attachment, 62 x 64 mm 07947-6340400

NOTE:
The carrier bearing and the carrier bearing outer race should be replaced as a set.
Adjust the carrier bearing preload after replacing the carrier bearing and the carrier bearing outer race.
Apply a light coat of clean transmission fluid on all parts before installation.

Transmission Housing Side

2. Differential Carrier Bearing Outer Race - Remove
1.
Remove the carrier bearing outer race (A) and the spacer (B) by heating the transmission housing to about 212 °F (100 °C) using a heat gun (C).
NOTE: Do not heat the transmission housing more than 212 °F (100 °C).

3. Differential Carrier Bearing Outer Race - Install
1.
Install the carrier bearing outer race (A) and the spacer (B).
2.
Drive the carrier bearing outer race (A) until it bottoms using the 15 x 135L driver handle and the 62 x 64 mm bearing driver attachment.

Torque Converter Housing Side

2. Differential Carrier Bearing Outer Race - Remove
1.
Remove the carrier bearing outer race (A), the 68 mm thrust shim (B), and the oil guide plate (C) by heating the torque converter housing to about 212 °F (100 °C) using a heat gun (D).
NOTE: Do not heat the torque converter housing more than 212 °F (100 °C).

3. Differential Carrier Bearing Outer Race - Install
1.
Install the carrier bearing outer race (A), the 68 mm thrust shim (B), and the oil guide plate (C).
2.
Drive the carrier bearing outer race (A) until it bottoms using the 15 x 135L driver handle and the 62 x 68 mm bearing driver attachment.