Moonroof Drain Channel Slider and Cable Assembly Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

4. Drain Channel Slider and Cable Assembly - Remove
1.
Remove the drain channel sliders (A).
2.
Slide the moonroof link assembly (A) back from the frame (B), then remove it.

5. All Removed Parts - Install

1.
Install the parts in the reverse order of removal.
NOTE:
Apply multipurpose grease to the glass brackets (A) and the guide rail area of the frame (B) indicated by the arrows.
Before reinstalling the motor, make sure both link lifters are parallel, and in the tilt up position.