Front Passenger's Weight Sensor Output Check After a Vehicle Collision

NOTE:
Check the front passenger's weight sensor output after a vehicle collision, regardless if the airbags and seat belt tensioners deployed or not.
When any of the following procedures are performed, go to Front Passenger's Weight Sensor Initialization.
?
The SRS unit was replaced/updated.
?
The front passenger's weight sensor, the front passenger's seat frame, and/or the front passenger's seat rail was replaced/removed.

1. HDS - Connect
1.
Turn the vehicle to the OFF (LOCK) mode.
2.
Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
3.
Turn the vehicle to the ON mode.


2. Front Passenger's Weight Sensor - Output Check After a Vehicle Collision