Pull out the front bumper (A) at the wheel arch area to release it from the hooks (B) on the side spacer.
4.
With the help of an assistant, while pulling the front bumper (A) away from the side spacer (B), release the bumper from the hooks (C) on the upper beam.
5.
With front fog light: With the help of an assistant, while holding the front bumper (A), disconnect the connectors (B).
6.
Remove the front bumper.
4.
Splash Separator - Remove
5.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
