Rear Bumper Removal and Installation
1. Rear Bumper - Remove

 
'15-17
 
models,
 
'18-20
 
models (Without Diffuser)

 
'18-20
 
models (With Diffuser)
1.
Remove the bolts (A, B), the screws (C), and the clips (D).
NOTE: There are some bumper types. Refer to Bumpers Component Location Index to confirm the relevant bumper type before performing the operation (for
 
'18-20
 
models).
2.
Pull out the rear bumper (A) at the wheel arch area to release it from the hooks (B) on the side spacer.
3.
With the help of an assistant, pull out the rear bumper (A) to release it from the hooks (B) on the upper brackets.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.