Engine Oil Jet Inspection - Honda FIT GK 2014-2020

1.	Oil Jet - Remove

2.	Oil Jet - Inspection

Type A

Type B

1.

Make sure that a 0.6 mm (0.024 in)^*1 or 0.5 mm (0.020 in)^*2 diameter pin will go through the nozzle hole (A).

Specifications

Position	Specification /Specification Value
A	0.8 mm (0.031 in)^*1
	0.7 mm (0.028 in)^*2
	Nozzle not damaged or bent

*1: Type A
*2: Type B

2.

Make sure that a 1.8 mm (0.071 in)^*1, or 2.2 mm (0.087 in)^*2 diameter pin will go through the oil intake (B).

Specifications

Position	Specification /Specification Value
B	2.0 mm (0.079 in)^*1
B	2.4 mm (0.094 in)^*2
C	Check ball moves smoothly

*1: Type A
*2: Type B

3.

Check the oil jet operation with an air nozzle.

Specifications

Condition	Specification
Apply air pressure of less than 105 kPa (1.07 kgf/cm², 15.2 psi) to the check ball	Check ball does not move

3.	All Removed Parts - Install

1.

Install the parts in the reverse order of removal.