DTC Troubleshooting: P2610
DTC P2610: PCM Ignition Off Internal Timer Malfunction
NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P2610 PCM Ignition Off Internal Timer Malfunction
      

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P2610 PCM Ignition Off Internal Timer Malfunction
     

Is DTC P2610 indicated?

     
YES
     
     
     
The failure is duplicated. Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If DTC P2610 goes away and the PCM was updated, troubleshooting is complete. If DTC P2610 goes away and the PCM was substituted, replace the original PCM.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.?