|
Transmission will not shift into P position/mode, or transmission cannot shift out of P position/mode
|
|
Control shaft assembly worn or damaged |
|
|
Control lever worn or damaged |
|
|
Park pawl and pawl shaft worn or damaged |
|
|
Parking gear worn or damaged |
|
|
Shift cable broken or out of adjustment |
|
|
Manual valve lever and lever pin worn or damaged |
|
|
Valve body assembly defective |
|
|
Transmission range switch defective or out of adjustment |
|
|
Stator shaft worn or damaged |
|
|
PCM defective |
|
|
Check the control shaft assembly for wear and damage. |
|
|
Check the control lever for wear and damage. |
|
|
Check the park pawl and the pawl shaft for wear and damage. If the park pawl or the pawl shaft are worn or damaged, replace them and also check the park gear for wear and damage. |
|
|
Check the parking gear for wear and damage. |
|
|
|
|
|
Check the manual valve lever and the lever pin for wear and damage. |
|
|
Check the valve body assembly for wear and damage. |
|
|
|
|
|
Check the stator shaft for wear and damage. | | 