M indicator does not come on even though the paddle shifter is operated in the S-paddle shift mode (with paddle shifter) (CVT)

M indicator does not come on even though the paddle shifter is operated in the S-paddle shift mode (with paddle shifter)

Probable cause(s)

	F-CAN communication line error
	Gauge control module defective
	PCM defective
	Transmission range switch defective or out of adjustment

Notes

	Check the F-CAN communication line.
	Check the F-CAN communication line by using the gauge control module self-diagnostic function.
	Check the indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function.
	Inspect the transmission range switch.