SRS components are located in this area. Review the SRS component locations, 2-door, 4-door and the precautions and procedures before doing repairs or service.
Remove the upholstery rings (A) securing the seat cushion cover (B).
1 line
2 lines
2.
Release the upholstery rings (A), then remove the seat cushion cover (B).
SRS components are located in this area. Review the SRS component locations, 2-door, 4-door and the precautions and procedures before doing repairs or service.
1.
Front Seat Cushion Cover - Install
NOTE: Replace all of the upholstery rings (A) fastening the seat-back cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).
1 line
2 lines
1.
Install the new upholstery rings (A) securing the seat cushion cover (B).
2.
Install the new upholstery rings (A) securing the seat cushion cover (B).
2.
Front Seat Cushion Cover/Pad - Install
1.
Install the seat cushion cover/pad (A).
1 line
2 lines
2.
Install the clip (A).
3.
Install the hook strips (B).
Without back panel
With back panel
4.
Install the hook and loop fastener(s) (A).
1 line
2 lines
5.
Install the hook strips (A).
2-door driver's seat
4-door driver's seat
2-door passenger's seat (without sitting switch)
2-door passenger's seat (with sitting switch)
4-door passenger's seat (without sitting switch)
4-door passenger's seat (with sitting switch)
6.
With seat heater: From under the seat cushion, install these items:
