Recirculation Control Motor Removal and Installation
NOTE: Set the FRESH position before removing the recirculation control motor.
1.
Blower Unit - Remove
Remove the blower unit
.
2.
Recirculation Control Motor - Remove
Remove the recirculation control motor (A).
1.
Recirculation Control Motor - Install
1.
Make sure the recirculation door and linkage move smoothly.
2.
Align the position of the damper lever pins (A), then install the recirculation control motor (B).
NOTE: Make sure the damper lever pins in the motor lever are visible through the holes.
3.
After installation, make sure the motor runs smoothly.
2.
Blower Unit - Install
Install the blower unit
.
