Select/Reset/Information Switch Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

1. Driver's Airbag - Remove

Remove the driver's airbag.

2. Select/Reset/Information Switch - Remove
1.
Completely loosen the screws (A).
2.
Remove the screws (B).
3.
Remove the select/reset/information switch (C).
4.
Disconnect these connectors.
Select/Reset/Information switch connector
Cruise control combination switch connector
5.
Remove the bracket (A).
6.
Remove the select/reset/information switch (B).


SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

1. Select/Reset/Information Switch - Install
1.
Install the select/reset/information switch (A).
2.
Install the bracket (B).
3.
Connect these connectors.
Select/Reset/Information switch connector
Cruise control combination switch connector
4.
Install the select/reset/information switch (A).

2. Driver's Airbag - Install

Install the driver's airbag.