Park Pin Switch Test - Honda Accord CR/CT 2012-2017

1.	Center Console - Remove

2.	Center Console Vent Duct - Remove (With Rear Ventilation)

Remove the right side center console vent duct (A).

3.	Ignition Switch - Test

1.

Disconnect the park pin switch connector.

2.

Check for continuity between the terminals in each switch position according to the table.

3.

If the continuity is not as specified, check the shift cable adjustment. If the cable adjustment is OK, replace the park pin switch (A).

4.

Connect the park pin switch connector.

4.	Center Console Vent Duct - Install (With Rear Ventilation)

Install the right side center console vent duct (A).

5.	Center Console - Install