Hazard Warning Switch Test
Without Navigation

1. Audio Unit Assembly - Remove

Remove the audio unit assembly.

With Navigation

2. Audio-Navigation Unit Assembly - Remove

Remove the audio-navigation unit assembly.

3. Hazard Warning Switch - Test
NOTE: When doing the hazard warning switch test, install the bulb correctly.
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the bulb or the hazard warning switch (A).

Without Navigation

4. Audio Unit Assembly - Install

Install the audio unit assembly.

With Navigation

5. Audio-Navigation Unit Assembly - Install

Install the audio-navigation unit assembly.