Washer Reservoir Removal and Installation
1. Right Front Inner Fender - Remove

Remove the right front inner fender as needed.

2. Windshield Washer Motor - Remove

Remove the windshield washer motor.

3. Washer Fluid Level Switch - Remove (Canada models)

Remove the washer fluid level switch.

4. PCM - Remove Without Disconnecting PCM Connectors (J35Y1 and J35Y2 Engines)
1.
Remove the PCM cover (A).
2.
Remove the bolts (B).
NOTE: Do not disconnect the PCM connectors to protect the PCM from damage.
3.
Remove the harness clips (C).
4.
Remove the bolts (D).
5.
Remove the PCM bracket (E).

5. PCM - Move Without Disconnecting PCM Connectors (J35Y1 and J35Y2 Engines)
Move the PCM (A).

NOTE: Do not disconnect the PCM connectors to protect the PCM from damage.


6. Washer Reservoir - Remove

USA and Mexico models

Canada models
Remove the washer reservoir (A).


1. PCM - Move Without Disconnecting PCM Connectors (J35Y1 and J35Y2 Engines)
Move the PCM (A).

NOTE: Do not disconnect the PCM connectors to protect the PCM from damage.


2. Washer Reservoir - Install

USA and Mexico models

Canada models
Install the washer reservoir (A).


3. PCM - Install Without Disconnecting PCM Connectors (J35Y1 and J35Y2 Engines)
1.
Install the PCM bracket (A).
2.
Install the bolts (B).
3.
Install the harness clips (C).
4.
Install the bolts (D).
NOTE: Do not disconnect the PCM connectors to protect the PCM from damage.
5.
Install the PCM cover (E).

4. Washer Fluid Level Switch - Install (Canada models)

Install the washer fluid level switch.

5. Windshield Washer Motor - Install

Install the windshield washer motor.

6. Right Front Inner Fender - Install

Install the right front inner fender.