ATF Warmer Removal and Installation
1.
Vehicle - Lift
Raise and support the vehicle
.
2.
Engine Coolant - Drain
Drain the engine coolant
.
3.
ATF Warmer - Remove
1.
Disconnect the ATF hoses (A).
NOTE: Turn the ends of the hoses up to prevent ATF from flowing out, then plug the hoses.
2.
Disconnect the water bypass hoses (A).
3.
Remove the ATF warmer (A).
1.
ATF Warmer - Install
1.
Install the ATF warmer (A).
2.
Connect the water bypass hoses (A).
3.
Connect the ATF hoses (A).
4.
Secure the ATF hoses with the clamps (B)
.
2.
Engine Coolant - Refill
Refill the radiator with engine coolant and bleed the air from the cooling system
.
3.
ATF - Level Check
Check the ATF level
.
