Line Pressure Switch Removal and Installation
1. Battery - Remove

Do the battery removal procedure.

2. Air Cleaner - Remove

Remove the air cleaner.

3. Battery Base - Remove

Remove the battery base.

4. Line Pressure Switch - Remove
1.
Disconnect the line pressure switch connector (A).
2.
Remove the line pressure switch (A) with the sealing washer (B).
NOTE: Loosen the switch by gripping the metal part, not the plastic part.

1. Line Pressure Switch - Install
1.
Install the line pressure switch (A) using a new sealing washer (B).
NOTE: Tighten the switch by gripping the metal part, not the plastic part.
2.
Connect the line pressure switch connector (A) securely.
NOTE: Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.

2. ATF - Level Check

Check the ATF level.

3. Battery Base - Install

Install the battery base.

4. Air Cleaner - Install

Install the air cleaner.