Input Shaft (Mainshaft) Speed Sensor Removal and Installation
1. Battery - Remove

Do the battery removal procedure.

2. Air Cleaner - Remove

Remove the air cleaner.

3. Battery Base - Remove

Remove the battery base.

4. Input Shaft (Mainshaft) Speed Sensor - Remove
1.
Disconnect the input shaft (mainshaft) speed sensor connector (A).
2.
Remove the input shaft (mainshaft) speed sensor (A) with the O-ring (B).

1. Input Shaft (Mainshaft) Speed Sensor - Install
1.
Install the input shaft (mainshaft) speed sensor (A) using a new O-ring (B).
2.
Connect the input shaft (mainshaft) speed sensor connector (A) securely.
NOTE: Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.

2. Battery Base - Install

Install the battery base.

3. Air Cleaner - Install

Install the air cleaner.