RDS-TMC Antenna Amplifier Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

1. C-Pillar Trim - Remove

Remove the left C-pillar trim.

2. RDS-TMC Antenna Amplifier - Remove
1.
Disconnect the window antenna connector (A) and the RDS-TMC antenna amplifier connector (B).
2.
Remove the RDS-TMC antenna amplifier (C).


SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

1. RDS-TMC Antenna Amplifier - Install
1.
Install the RDS-TMC antenna amplifier (A).
2.
Connect the RDS-TMC antenna amplifier connector (B) and the window antenna connector (C).

2. C-Pillar Trim - Install

Install the left C-pillar trim.