Transmission Housing Final Drive Shaft Tapered Roller Bearing Outer Race Replacement
Special Tools Required
Image Description/Tool Number
310169.png Driver Handle, 15 x 135L 07749-0010000
8351850.png Oil Seal Driver Attachment, 68.5 mm 07965-SA00600

NOTE:
The tapered roller bearing and the tapered roller bearing outer race should be replaced as a set.
Replace the tapered roller bearing with a new one whenever the tapered roller bearing outer race is replaced.
Adjust the tapered roller bearing preload after replacing the tapered roller bearing and the tapered roller bearing outer race.
Coat all parts with transmission fluid during installation.

1. Tapered Roller Bearing Outer Race - Remove
1.
Remove the tapered roller bearing outer race (A).

2. Tapered Roller Bearing Outer Race - Install
1.
Place the tapered roller bearing outer race (B).
2.
Drive the tapered roller bearing outer race securely using the 15 x 135L driver handle and the 68.5 mm oil seal driver attachment so there is no clearance between the tapered roller bearing outer race, the oil guide plate, and the transmission housing.