DTC Troubleshooting: P0733
DTC P0733: 3rd Gear Incorrect Ratio
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot with the HDS, and review the General Troubleshooting Information.

DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P0733 3rd Gear Incorrect Ratio
      

1.
Problem verification:

Problem verification
?1.
Press the engine start/stop button to select the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Test-drive the vehicle in 3rd gear in D for at least 12 seconds.

?4.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P0733 3rd Gear Incorrect Ratio
      

Is DTC P0733 indicated?

     
YES
     
     
     
The failure is duplicated. Go to step 2.
     
NO
     
     
     
Intermittent failure, the system is OK at this time.?
2.
3rd clutch pressure check:

3rd clutch pressure check
?1.
Measure the 3rd clutch pressure.

Is the 3rd clutch pressure within the service limit?

     
YES
     
     
     
The 3rd clutch pressure is OK. Faulty 3rd clutch. Replace the 3rd/6th clutch or the transmission. If replacing the 3rd/6th clutch, clean off any metal debris or excessive clutch material inside the transmission, the ATF cooler, the ATF hoses, the ATF pipes, and the hydraulic circuit. Then, replace the 3rd/6th clutch and the torque converter.?
     
NO
     
     
     
Go to step 3.
3.
3rd clutch hydraulic circuit check:

3rd clutch hydraulic circuit check
?1.
Measure the line pressure.

Is the line pressure within the service limits?

     
YES
     
     
     
Clogged 3rd clutch hydraulic circuit. Clean the 3rd clutch hydraulic circuit, or replace the transmission. If cleaning the 3rd clutch hydraulic circuit, clean off any metal debris or excessive clutch material inside the transmission, the ATF cooler, the ATF hoses, the ATF pipes, and the hydraulic circuit. Then, replace the torque converter.?
     
NO
     
     
     
The 3rd clutch hydraulic circuit is OK. Faulty ATF pump or main regulator valve. Replace the main valve body (ATF pump), the regulator valve body (main regulator valve), or the transmission. If replacing the main valve body or the regulator valve body, clean off any metal debris or excessive clutch material inside the transmission, the ATF cooler, the ATF hoses, the ATF pipes, and the hydraulic circuit. Then, replace the main valve body or the regulator valve body and the torque converter.?