DTC Troubleshooting: B1231 (09)
DTC B1231 or DTC indicator 09: An Open in the Evaporator Temperature Sensor Circuit
DTC Description
DTC
B1231 An open in the evaporator temperature sensor circuit
  

1.
Problem verification:

Problem verification
?1.
Clear the DTC with the HDS.


?2.
Turn the ignition switch to LOCK (0) and then back to ON (II), or press the engine start/stop button to select the OFF mode and then the ON mode.

?3.
Do the Self-Diagnostic Function with the HDS or the climate control unit.

?4.
Check for DTCs.
DTC Description
DTC
B1231 An open in the evaporator temperature sensor circuit
  

Is DTC B1231 or 09 indicated?

     
YES
     
     
     
Go to step 2.
     
NO
     
     
     
Intermittent failure. Check for loose wires or poor connections on the evaporator temperature sensor circuit.?
2.
Open wire check (TEVA line):

Open wire check (TEVA line)
?1.
Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

?2.
Disconnect the following connectors.

?3.
Check for continuity between test points 1 and 2.
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Evaporator temperature sensor 2P connector: disconnected
Test circuit
TEVA
Test point 1
Climate control unit 32P connector No. 26 (RED)
Test point 2
Evaporator temperature sensor 2P connector No. 1 (BRN)


Is there continuity?

     
YES
     
     
     
The TEVA wire is not open. Go to step 3.
     
NO
     
     
     
Repair an open in the wire between the climate control unit and the evaporator temperature sensor.?
3.
Open wire check (SENSOR COM/SENS-COM line):

Open wire check (SENSOR COM/SENS-COM line)
?1.
Check for continuity between test points 1 and 2.
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Evaporator temperature sensor 2P connector: disconnected
Test circuit
SENSOR COM/SENS-COM
Test point 1
Climate control unit 32P connector No. 22 (BLU)
Test point 2
Evaporator temperature sensor 2P connector No. 2 (RED)


Is there continuity?

     
YES
     
     
     
The SENSOR COM/SENS-COM wire is OK. Go to step 4.
     
NO
     
     
     
Repair an open in the wire between the climate control unit and the evaporator temperature sensor.?
4.
Shorted wire check (TEVA line to S 5V/S5V line):

Shorted wire check (TEVA line to S 5V/S5V line)
?1.
Check for continuity between test points 1 and 2.
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Evaporator temperature sensor 2P connector: disconnected
Test circuit
TEVA, S 5V
Test point 1
Climate control unit 32P connector No. 24 (BLK)
Test point 2
Climate control unit 32P connector No. 26 (RED)


Is there continuity?

     
YES
     
     
     
Repair a short in the wires between the climate control unit and the evaporator temperature sensor.?
     
NO
     
     
     
The TEVA wire and S 5V/S5V wire are OK. Go to step 5.
5.
Evaporator temperature sensor check:

Evaporator temperature sensor check
?1.
Test the evaporator temperature sensor.

Is the evaporator temperature sensor OK?

     
YES
     
     
     
     
NO