Audio-Navigation System DTC Troubleshooting: 1402

DTC 1402: Audio Error 2

NOTE:

	Check the vehicle battery condition first.
	This navigation DTC sets when there is a problem with the built-in CD/DVD player, or an unplayable disc is inserted.
	If the audio-navigation unit displays an error message when you turn on the navigation system, follow the instructions.
	Check that the fan screen on the back to the audio-navigation unit is not blocked. Clean it if necessary.
	Before you troubleshoot, make sure to follow the General Troubleshooting Information.
	Check any official Honda service website for more service information about the navigation system.

Problem verification:

Problem verification

?1.	Check that the temperature is below 158 F (70 C) in the dash.

?2.	Clear the hard error codes.

?3.	Press the engine start/stop button to select the OFF mode and then select the ON mode.

?4.	Insert a disc into the audio-navigation unit, and play the disc, then eject the disc.

?5.	Check for hard error codes.

Is DTC 1402 indicated?

The failure is duplicated, go to step 2.

Intermittent failure, the system is OK at this time.?

Audio-navigation unit check (substitution):

Audio-navigation unit check (substitution)

?1.	Clear the hard error codes.

?2.	Press the engine start/stop button to select the OFF mode and then select the ON mode.

?3.	Insert a known-good disc into the audio-navigation unit, and play the disc, then eject the disc.

?4.	Check for hard error codes.

Is DTC 1402 indicated?

Original disc is faulty.?