DTC Troubleshooting: B2A60-52
DTC B2A60-52: Dynamic Camera Aiming Incomplete
NOTE:
Before you troubleshoot, review the general troubleshooting information.
If the multipurpose camera unit or the windshield is removed or replaced, you must aim it, otherwise DTC B2A60-52 is stored even if the system is OK.

DTC Description
DTC
Freeze Frame
B2A60-52 Dynamic Camera Aiming Incomplete
    

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Turn the vehicle to the OFF (LOCK) mode, then the ON mode.

?4.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
B2A60-52 Dynamic Camera Aiming Incomplete
    

Is B2A60-52 indicated?

     
YES
     
     
     
The failure is duplicated. Do the dynamic camera aiming.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.?