DTC Troubleshooting: P2583-54
DTC P2583-54: Millimeter Wave Radar Aiming Incomplete
NOTE:
Before you troubleshoot, review the general troubleshooting information.
If the millimeter wave radar is removed or replaced, you must aim it, otherwise DTC P2583-54 is stored even if the system is OK.

DTC Description
DTC
Freeze Frame
P2583-54 Millimeter Wave Radar Aiming Incomplete
    

1.
Millimeter wave radar check (aiming):

Millimeter wave radar check (aiming)
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Aim the millimeter wave radar.

?4.
Turn the vehicle to the OFF (LOCK) mode, then the ON mode.

?5.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
P2583-54 Millimeter Wave Radar Aiming Incomplete
    

Is P2583-54 indicated?

     
YES
     
     
     
Check for loose or poor connections. If OK, replace the millimeter wave radar.?
     
NO
     
     
     
Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTC's troubleshooting.?