Check for loose terminal and poor connection in the following connector.
Multipurpose camera unit 20P connector
Is the connector OK?
YES
Go to step 2.
NO
Repair loose terminal or poor connection. Then clear the DTC by using the HDS and recheck DTC U0029-00. If DTC U0029-00 is not confirmed, troubleshooting is complete.?
2.
Multipurpose camera unit communication check:
Multipurpose camera unit communication check:
?1.
Turn the vehicle to the OFF (LOCK) mode, then start the engine.
?2.
Check for communication between the multipurpose camera unit and the HDS.
Is there communication between the multipurpose camera unit and the HDS?