Engine runs, but vehicle does not move in any position
Probable cause(s)
Low transmission fluid (HCF-2) level
Transmission range switch defective or out of adjustment
Engine output low
Transmission fluid strainer or transmission fluid filter clogged
Drive pulley, driven pulley, pulley shaft, steel belt, and pulley related parts worn or damaged
Transmission fluid feed pipe worn, damaged, or out of round
Input shaft worn or damaged
Secondary drive gear or secondary driven gear worn or damaged
Final driven gear worn or damaged
Sun gear worn or damaged
Control shaft assembly worn or damaged
Control lever worn or damaged
Park pawl and pawl shaft worn or damaged
Manual valve lever and lever pin worn or damaged
Transmission fluid pump worn, binding, or foreign material in transmission fluid pump
Transmission fluid pump drive chain or transmission fluid pump drive/driven sprocket worn or damaged
Main valve body defective
Secondary valve body defective
Linear solenoid valve body defective
Clutch reducing valve body defective
Stator shaft worn or damaged
Torque converter assembly defective
Torque converter ring gear worn or damaged
Transmission assembly and drive plate installation defective
Notes
Check the transmission fluid (HCF-2) level.
Inspect the transmission range switch.
Check the transmission fluid strainer and the transmission fluid filter for debris. If the transmission fluid strainer or the transmission fluid filter is clogged, find the damaged components that caused debris.
Check the drive pulley, the driven pulley, the pulley shafts, the steel belt, and pulley related parts for wear and damage. If there are worn or damaged, replace the transmission housing assembly.
Check the transmission fluid feed pipe for wear, damage, and out of round.
Inspect the input shaft assembly for wear and damage. If the input shaft is worn or damaged, replace it and also check the related part of the input shaft assembly for wear and damage.
Check the secondary drive gear, the secondary driven gear, and the final driven gear for wear and damage.
Check the sun gear for wear and damage. If the sun gear is worn or damaged, replace it and also check the planetary carrier pinion gears, the forward clutch, and the drive pulley shaft splines for wear and damage.
Check the control shaft assembly for wear and damage. If the control shaft assembly is worn or damaged, replace it as an assembly.
Check the control lever for wear and damage.
Check the park pawl and the pawl shaft for wear and damage. If the park pawl or the pawl shaft are worn or damaged, replace them and also check the park gear for wear and damage.
Check the manual valve lever and the lever pin for wear and damage.
Check the transmission fluid pump assembly for wear and damage. If the transmission fluid pump assembly is worn or damaged, replace it as an assembly.
Check the transmission fluid pump drive chain and the transmission fluid pump drive/driven sprocket for wear and damage.
Check the main valve body for wear and damage.
Check the secondary valve body for wear and damage.
Check the linear solenoid valve body for wear and damage.
Check the clutch reducing valve body for wear and damage.
Check the stator shaft for wear and damage.
Inspect the torque converter assembly for wear and damage. If the torque converter assembly is worn or damaged, replace it as an assembly.