Check the drive pulley, the driven pulley, the pulley shafts, the steel belt, and pulley related parts for wear and damage. If there are worn or damaged, replace the transmission housing assembly.

Inspect the clearance between the forward clutch end-plate and the top disc. If the clearance is out of tolerance, replace the forward clutch assembly.

Check the planetary carrier for wear and damage. If the planetary carrier is worn or damaged, replace it and also check the planetary carrier pinion gears, the reverse brake, and the drive pulley shaft splines for wear and damage.

Check the thrust needle bearing and the thrust washers on the planetary carrier for wear and damage. If the thrust needle bearing or the thrust washer are worn or damaged, replace them and adjust the clearance with the thrust shim.

Inspect the torque converter assembly for wear and damage. If the torque converter assembly is worn or damaged, replace it as an assembly.