Check the actuator operation by connecting power and ground according to the table.
3.
If the mirror fails to work properly, check for an open or high resistance in the wire between the connector and the mirror holder. If the wire is OK, replace the power mirror assembly.
Mirror Defogger
Defogger Test (With Mirror Defogger)
4.
Check for continuity between the terminals according to the table. There should be continuity.
5.
If there is no continuity, check for an open or high resistance in the wire between the connector and the mirror holder. If the wire is OK, replace the mirror holder.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
