Interior Light Switch Removal, Installation, and Test

NOTE: The interior light switch is built into the moonroof switch.

1. Front Individual Map Light - Remove
1.
Turn the front individual map light switch OFF.
2.
Carefully pry off the lenses (A).
3.
Remove the front individual map light (B).
4.
Disconnect the connectors (C).

2. Moonroof Switch - Remove

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

1. Interior Light Switch - Test
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified the interior light switch is faulty; replace the moonroof switch assembly (A).