CVT Oil Seal Replacement
Special Tools Required
Image Description/Tool Number
3247745.png Attachment, 22 x 24 mm 07746-001A800
310169.png Driver Handle, 15 x 135L 07749-0010000
310214.png Oil Seal Driver Attachment, 58 mm 07JAD-PH80101
2599953.png Oil Seal Driver, 65 mm 07JAD-PL9A100

NOTE: Keep all foreign particles out of the transmission.

Left Differential Oil Seal

5. Left Differential Oil Seal - Remove

6. Left Differential Oil Seal - Install
1.
Install the left differential oil seal (A) flush with the transmission housing using the 15 x 135L driver handle and the 58 mm oil seal driver attachment.
NOTE: Before installation, apply a light coat of clean transmission fluid to the surface both of the press-fit and the lip that are on the oil seal.

Right Differential Oil Seal

5. Right Differential Oil Seal - Remove

6. Right Differential Oil Seal - Install
1.
Install the right differential oil seal (A) flush with the torque converter housing using the 65 mm oil seal driver.
NOTE: Before installation, apply a light coat of clean transmission fluid to the surface both of the press-fit and the lip that are on the oil seal.

Control Shaft Oil Seal

5. Control Shaft Oil Seal - Remove

6. Control Shaft Oil Seal - Install
1.
Install the control shaft oil seal (A) flush with the transmission housing using the 22 x 24 mm attachment.
NOTE: Before installation, apply a light coat of clean transmission fluid to the surface both of the press-fit and the lip that are on the oil seal.