Fuel Pulsation Damper Removal and Installation
Flammable - Keep Fire Away
NOTE: Refer to the
Fuel and Emissions Systems Service Precautions
before disconnecting the fuel line.
1.
Fuel Rail - Remove
2.
Fuel Pulsation Damper - Remove
1.
Place a wrench (A) on the fuel rail (B).
2.
Place a wrench (C) on the fuel pulsation damper (D).
3.
Fix a wrench at the fuel rail side, turn a wrench at the fuel pulsation damper side, then remove the fuel pulsation damper and the gasket (E).
4.
If needed, remove the cap (F).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal with a new gasket.
