Carpet Removal and Installation
NOTE: SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Both Front Seats - Remove
2.
Center Console - Remove
3.
Both Kick Panels - Remove
4.
Both B-Pillar Lower Trims - Remove
5.
Steering Joint Cover - Remove
6.
Rear Seat Cushion - Remove
7.
Rear Heater Joint Duct - Remove
8.
Carpet - Remove
1.
Remove the clip (A).
2.
Cut the carpet (B) in the area (C) as shown.
3.
Release the hook and loop fastener (D).
4.
Pull out the seat harnesses (E), then remove the carpet.
5.
If necessary, remove the floor mat holder (A).
9.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
