MTF Cooler Hose Removal and Installation (K20C1 (M/T))

MTF Cooler Hose Removal and Installation

NOTE:

Where icon is shown, click for further information.

Detailed information, notes, and precautions

1.	Vehicle - Lift

2.	Air Cleaner - Remove

3.	Engine Undercover - Remove

NOTE: Remove the necessary part(s).

4.	Transmission Fluid - Drain

5.	Engine Coolant - Drain

6.	MTF Cooler Hose - Disconnect

NOTE for installation

Connect MTF cooler hoses (A) until the hose ends contact the bulges (B) or the pipe end (C), and adjust the hose clamps (D) positions.

When attaching MTF cooler hoses, align the paint marks (E) on the hoses with the paint marks (F) on the MTF cooler lines as shown.

When installing the hose clamps, make sure they do not interfere with the surrounding parts.

7.	All Removed Parts - Install

Install the parts in the reverse order of removal.