Engine Mount Tightening Procedure

NOTE:
How to read the torque specifications.
Reinstall the mounting bolts and support nuts in the sequence given in the following steps. Failure to follow this sequence may cause excessive noise, vibration, and severe damage to the engine mount brackets.

1. Jack - Remove


2. Engine/Transmission Mount - Tightening Procedure

NOTE: When installing the side engine mount, tighten the - bolts at first and temporarily tighten the - bolt while attaching the side engine mount bracket to the side engine mount, then tighten the remaining bolts and nuts according to the sequence shown in the following table.

Tightening Sequence
Mount Removed
Mount Tightening Sequence
Side Engine Mount
, , and
Transmission Mount
and
Torque Rod

Tightening Torque
Mount No.
Mount Name
Mount Bolt/Nut Tightening Sequence
Side Engine Mount
49 N·m
(5.0 kgf·m, 36 lbf·ft)
Replace.
54 N·m
(5.5 kgf·m, 40 lbf·ft)
Replace.
54 N·m
(5.5 kgf·m, 40 lbf·ft)
Replace.
93 N·m
(9.5 kgf·m, 69 lbf·ft)
Replace.
93 N·m
(9.5 kgf·m, 69 lbf·ft)
Replace.
Transmission Mount (L15B7 engine)
74 N·m
(7.5 kgf·m, 55 lbf·ft)
Replace.
78 N·m
(8.0 kgf·m, 58 lbf·ft)
Replace.
78 N·m
(8.0 kgf·m, 58 lbf·ft)
Replace.
    
Transmission Mount (L15BA engine/L15BY engine)
74 N·m
(7.5 kgf·m, 55 lbf·ft)
Replace.
54 N·m
(5.5 kgf·m, 40 lbf·ft)
Replace.
54 N·m
(5.5 kgf·m, 40 lbf·ft)
Replace.
    
Torque Rod
93 N·m
(9.5 kgf·m, 69 lbf·ft)
Replace.
93 N·m
(9.5 kgf·m, 69 lbf·ft)
Replace.