Side Engine Mount Removal and Installation
2. Engine - Support
1.
Lift and support the engine with a jack and a wood block under the oil pan.

3. Three Way Joint - Remove
1.
Remove the three way joint (A) and the three way joint bracket (B).
NOTE: Unless otherwise indicated, illustrations used in this procedure are for models with the dynamic damper (C) and the bracket (D). Some models may only have the dynamic damper only while others may not have both the damper and bracket.


NOTE: Do not disconnect the water bypass hoses.

5. Side Engine Mount - Remove
1.
Remove the ground cable (A).
2.
Remove the side engine mount bracket (B).
3.
Remove the side engine mount (C).

6. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.