DTC Troubleshooting: B00A0-54

DTC B00A0-54: Front Passenger's Weight Sensor not Calibrated

NOTE:

	Before doing this troubleshooting procedure, find out if the vehicle was in a collision. If so, verify that all the required components were replaced with new components of the correct part number and were properly installed.
	Before doing this troubleshooting procedure, review SRS Precautions and Procedures and General Troubleshooting Information.

DTC Description	DTC
B00A0-54 Front passenger's weight sensor not calibrated

Problem verification:

Problem verification

?1.	Clear the DTCs with the HDS.

?2.	Turn the vehicle to the ON mode, then wait for 10 seconds.

?3.

Check for DTCs with the HDS.

DTC Description	DTC
B00A0-54 Front passenger's weight sensor not calibrated

Is DTC B00A0-54 indicated?

Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.?