DTC Troubleshooting: P0630
DTC P0630: VIN Not Programmed or Mismatch
NOTE:
Before you troubleshoot, review the general troubleshooting information.
This DTC is stored only when the PCM does not have the VIN information of the vehicle. Use the HDS to input the missing VIN information.

DTC Description
Confirmed DTC
Pending DTC
P0630 VIN Not Programmed or Mismatch
    

1.
VIN check:

VIN check
?1.
Turn the vehicle to the ON mode.

?2.
Check the VIN with the HDS.

Does the HDS show the vehicle's VIN?

     
YES
     
     
     
Go to step 3.
     
NO
     
     
     
Go to step 2.
2.
VIN check (rewrite):

VIN check (rewrite)
?1.
Input the correct VIN to the PCM with the HDS.

Does the HDS show COMPLETE?

     
YES
     
     
     
Go to step 3.
     
NO
     
     
     
Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM, then recheck. If DTC P0630 goes away and the PCM was substituted, replace the original PCM.?
3.
PCM check:

PCM check
?1.
Clear the DTC with the HDS.


?2.
Turn the vehicle to the OFF (LOCK) mode.

?3.
Turn the vehicle to the ON mode, and wait 5 seconds.

?4.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
P0630 VIN Not Programmed or Mismatch
   

Is DTC P0630 indicated?

     
YES
     
     
     
Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM, then recheck. If DTC P0630 goes away and the PCM was substituted, replace the original PCM.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.?