Poor or no sound with AM/FM radio

AM/FM radio display is blank or no station information is displayed

Excessive transition between analog broadcast and digital HD Radio^(TM) broadcast

Receiver is located near the edge of the digital HD Radio^(TM) coverage area. Refer to www.hdradio.com to verify radio stations in your coverage area

HD Radio^(TM) changes HD channel on its own

This is intended behavior. HD Radio^(TM) is set to revert to main channel after extended loss of HD2/HD3 broadcast

AM radio reception changes at night

This is a system characteristic. AM radio stations are required by the government (FCC) to lower their power at night

Audio unit will not turn on (No information display)

No sound is heard from all the speakers (display is normal)

Aftermarket amplifier or speakers

Audio system sound is weak or distorted (display is normal)

AM/FM radio preset memory is lost

Internal error

Volume does not increase with speed

Speed-sensitive Volume Control settings (see the Owner's Manual)

Volume is too high or too low when driving at freeway speeds

Speed-sensitive Volume Control settings (see the Owner's Manual)

Center display unit button does not work

Check the Touch Panel Sensitivity in the System Settings

Center display unit does not dim

The MID does not display the audio unit information

Audio remote-HFL switch does not work properly (audio unit buttons work)

Audio unit does not exit anti-theft mode

USB device does not function

Bluetooth audio does not work

Bluetooth phone compatibility (see the Owner's Manual)

Pandora is not is displayed as an audio source

Rearview camera image does not come on

Rearview camera image does not change when selecting different views

LaneWatch camera image does not come on

XM radio display is blank and no station information is displayed

Active sound control does not work

System always comes up in-line diagnostic mode (without navigation)