Front Door Latch Removal and Installation
4. Front Door Latch - Remove


1.
Remove the bolts (A) with a TORX T30 bit.

2.
Driver's side: Remove the front door cylinder rod (B).

3.
Remove the front door latch (C).

NOTE: Take care not to bend the cables (D).





4.
Open the latch protector cover (A).





5.
Disconnect the inner handle cable (A) and the latch cable (B) from the front door latch (C).

5. All Removed Parts - Install

1.
Install the parts in the reverse order of removal.

NOTE: Make sure the ditch (A) is within the range (B) as shown.