Carpet Removal and Installation
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Both Front Seats - Remove
2.
Both Rear Seat Foot Guide Cover - Remove
3.
Both Kick Panels - Remove
4.
Center Console - Remove
5.
Both B-Pillar Lower Trim - Remove
6.
Floor Carpet - Remove
1.
Remove the clips (A).
2.
Release the fasteners (B).
3.
Remove the rear heater joint duct (A).
4.
Cut the carpet in the area (A) as shown.
5.
Pull out the harnesses (B), then remove the floor carpet (C).
7.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
