Front Seat-Back Cover Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

2. Front Seat-Back Cover/Pad - Remove
1.
Release the hooks (A).




Driver's seat

Passenger's seat
2.
Remove the harness clips (A) and the harness holders (B).
3.
Unzip the front seat-back cover (A).
4.
Release the hooks (A).
5.
Remove the upholstery rings (A) securing the front seat-back cover (B).





6.
With side airbag: Remove the nut (A) and harness clip (B).
7.
With seat heater: Remove the harness clip (C).
8.
Pull out the harness(es) (A, B).
9.
Remove the head restraint guides (A).
10.
Remove the front seat-back cover/pad (A).

3. Front Seat-Back Cover - Remove
1.
Remove the upholstery rings (A) securing the front seat-back cover (B).

4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Replace all of the upholstery rings (A) fastening the front seat-back cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).