Remove the bolt, then lift the door speaker straight up to release the lower clips (A).
2.
Disconnect the connector (B).
3.
All Removed Parts - Install
1.
Install the door speaker in the reverse order of removal.
Tweeter
1.
Tweeter Cover - Remove
1.
Disconnect the connector (A).
2.
Tweeter - Remove
3.
All Removed Parts - Install
1.
Install the tweeter in the reverse order of removal.
Door Speaker
1.
Speaker - Test
1.
Measure the resistance between terminals No. 1 and No. 2. There should be about 4 ?.
2.
If the resistance is not as specified, replace the door speaker.
Tweeter
1.
Tweeter - Test
1.
Measure the resistance between terminal No. 1 and the outside terminal of the capacitor (A). There should be about 4 ?. Also check the capacitor condition.
2.
If the resistance is not as specified, replace the tweeter.