Heater Control Panel Removal and Installation

1.	Audio Unit Assembly - Remove (Without navigation)

2.	Audio-Navigation Unit Assembly - Remove (With Navigation)

3.	Driver's Dashboard Lower Cover - Remove

4.	Passenger's Dashboard Pad - Remove

5.	Control Cable - Remove

6.	Heater Control Panel - Remove

1.

Pull out the heater control panel (A).

2.

Remove the harness clips (B).

3.

Disconnect the connectors (C).

4.

With keyless access system: Disconnect the connector (D).

7.	Engine Start/Stop Switch - Remove (With keyless access system)

8.	All Removed Parts - Install

1.

Install the parts in the reverse order of removal.

NOTE: After assembly, check that the lever slides or the dial turns smoothly through the full stroke from right to left.