Power Window Master Switch Test
NOTE: The power window master switch has a built-in control unit. Therefore it cannot be tested by itself.
Go to power window master switch input test
. If all the input tests prove OK,
replace the power window master switch
.
1.
Driver's Door Switch Panel - Remove
2.
Power Window Master Switch - Test
Front Passenger's
Left Rear
Right Rear
1.
Check for continuity between the terminals according to table.
2.
If the continuity is not as specified,
replace the power window master switch
(A).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
4.
Power Window Control Unit - Reset
