Multipurpose Camera Unit Removal and Installation
1. Camera Cover - Remove
NOTE: When removing the camera cover (A), take care not to damage the camera cover base (B).
1.
Remove the camera cover.

2. Multipurpose Camera Unit - Remove
NOTE:
The multipurpose camera bracket (A) attached to the windshield is not sold separately.
The multipurpose camera unit performs writing to the EEPROM after the vehicle is switched to the OFF (LOCK) mode. Wait for about three seconds and then disconnect the connector.
Do not touch the lens part of the multipurpose camera unit directly.

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.