A/C Pressure Sensor Removal and Installation

1.	A/C Refrigerant - Recover

2.	Front bumper - Remove

3.	A/C Pressure Sensor - Remove

Disconnect the connector (A).

Hold the pressure sensor block (B) with a wrench to prevent damaging the receiver line, then remove the A/C pressure sensor (C).

4.	All Removed Parts - Install

Install the parts in the reverse order of removal, and note these items:

A new O-ring should be used at each fitting. Prior to installation, apply a thin coat of the same refrigerant oil used in the A/C compressor. Be sure to use the correct O-rings for refrigerant types to avoid leakage.